[Stall torque] 4.8(6.6V)/ 5.4(7.4V)/ 6.1(8.4V)kgcm
65.8(6.6V) / 74.9 (7.4V) / 85.1 (8.4V)ozin
[Speed] 0.04(6.6V)/0.03(7.4V)/0.03(8.4V) Sec/60
[Weight] 63.8g / 2.25 oz
[Measurement] 40 x 20 x 40.45mm / 1.38 x 0.79 x 1.59 in
[Lead length] 300mm
[Volt range] 4.5V 8.5V
[neutral] 760Sec. (With the servo programmer it can be changed to 1500Sec. )
[herz] XBUS1KHz / PWM333Hz

high performance brushless motor
programmableslow startOFF
full metal gear
full metal case
wide voltage
double ball bearing
angle120/180
does not come with servo arm

Important Notes on Using Our Servos

Our servos are programmed to operate with high precision and sensitivity.
Because of this, if there are any obstructions within the servos range of motion and it is unable to move as commanded by the transmitter, the servo may experience excessive load. This can result in damage to the internal circuit board due to overheating.

When installing the servo for throttle, aileron, or other control surfaces, please make sure to leave a small amount of free play between the servo travel range and the mechanical movement range. This helps prevent any binding or overloading of the servo.